Izdelki za kemično ločevanje (82)

Catonium TPPBr (Tetraphenylphosphonium Bromide) is a white to offwhite, its chemical formula is C24H20BrP. TPPBr is a quaternary phosphonium salt mainly used in pharmaceuticals, as accelarator for fluoroelastomers , adhesion promotor for fluoroelastomers and curative of polyacrylate polymers which extends the shelf life of the compound and decreases the mould fouling. This material is highly soluble in water and slightly soluble in alcohols. Tetraphenylphosphonium Bromide is also known as TPP, TPPBr, TPPB and TPPBr. Compared to amines, imidazoles and quaternary ammonium salts CatOnium TPPBr features considerable better latency and thermal stability Further it offers a low odor, minimal color formation and controlled reactivity. Availability Europe and United States Provided CatOnium TPPBr is on stock in our local warehouses our lead time is about one week if delivered in 25 KG drums. CAS number:2751-90-8 EC number:220-393-4 HS code:2931 39 00 Assay:≥ 99.00 % Loss on drying:≤ 1.00 % Triphenyl phosphine:≤ 0.50 % Boiling point:457.77 ºC Flash point:> 260 ºC Melting point:294 – 297 °C Log Kow:5.28 Solubility in water:Soluble @ 20 ºC Vapor pressure:4.2E-005 Pa

In most polymers, Rostabil TNF (Trisnonylphenol phosphite) is a cost effective, high purity stabilizer that improves color and processing stability during recovery, drying, compounding, processing and end use. Synergism is realized when it is combined with other stabilizers such as hindered phenols. It may be added alone or in combination with the monomers and / or in antioxidant emulsions during recovery and / or during compounding. TNF is excellent in preventing gel formation polymerization, finishing, storage and factory processing. TNF is a versatile phosphite stabilizer which is useful in a large number of polymers such as polyethylene, polypropylene, polystyrene, HDPE, LLDPE, SBR, ABS, PVC and others. TNPP is also a suitable stabilizer for a myriad of elastomers such as SBR, NBR and SIS. It is highly effective in light colored solution and emulsion polymerized elastomers. The use of the TNF phosphite is sanctioned by the Food CAS number:26523-78-4 EC number:247-759-6 HS code:2920 29 00 Acid Value:≤0.3 (mg KOH/gm) Colour:≤60 (Hazen) Free nonylphenol:≤3.0 % Phosphorus content:4.30% Boiling point:>300 °C @ 102 kPa Decomposition temperature:322 °C under nitrogen Flash point:207 ºC @ 1 atm Melting point:+/- 6 ºC Partition coefficient (log Pow):21.60 ± 0.60 Refractive index:1.527 – 1.533 @ 25 °C Solubility in water:Insoluble (< 0.1 mg/l) Specific gravity:0.975 – 0.998/m3 (25 °C/15 °C) Vapour pressure:0.000000000005 Pa

Enox BPO 75W (Dibenzoyl Peroxide 75%) is a white particle moistened with 25% water. This diacyl peroxide has C14H10O4 as chemical formula and it is used as initiator for the (co)polymerization of styrene, acrylonitrile, acrylates, methyacrylates and vinylacetate. Further it is being used to cure unsaturated polyester, vinyl esther and acrylic thermosetting resins at ambient temperatures. Dibenzoyl peroxide also so known as benzoyl peroxide, BPO and benzoperoxide. Availability Europe Enox BPO 75W is on stock in our local warehouses. Our lead ime is about one week if delivered in 20 KG PE drums. South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:94-36-0 EC number:202-327-6 HS code:202-327-6 Appearance:White particle Assay:72.0-76.0 % Active oxygen:4.75-5.02 Cl:≤0.20 % Free acid (as C6H6COOH):≤0.30 % (In)organic hydrolysable Cl:≤0.25 % Water:≥ 23.0% Melting point:103 – 105 20 °C @ 1.013 hPa Partition coefficient (log Pow):3.43 @ 20 °C Relative density:1.33 @ 25 °C SADT:80 °C Solubility in water:Slightly soluble (9 .1 mg/l) @ 25 °C Vapour pressure:< 1mm Hg @ 20 °C

Autres noms : Sable rutile, Rutile. Numéro CAS : 1317-80-2. Formule : TiO2. Spécifications : TU-U 14-1O-016-98. Code marchandise harmonisé : 2614OO9OOO. Apparence : Sable coulant librement brun foncé à noir. Forme du grain : allongé, roulé. Couleur du grain : rouge (différentes teintes), marron, noir. Stockage : Dans des conteneurs ou des sacs fermés, à l'abri des dommages physiques. Conditions de stockage illimitées. Utilisation finale : le concentré de rutile est utilisé dans la production d'électrodes de soudage, de pigment de titane dioxyde, éponge de titane et titane métallique. TiO2 min:94 AI2O3 max:0,6 Fe2O3 max:2,8 SiO2 max:1,5 ZrO2 max:1,0 P2O5 max:0,07 SO3 max:0,05 U+Th max:70 ppm Humidité max:0,5

Meldrum’s Acid is a white crystalline powder which has C6H8O4 as its chemical formula. It is also known as 2,2dimethyl1,3dioxane4,6dione or isopropylidene malonate. Shipment Info Europe and United States Provided Meldrum’s Acid is on stock in our local warehouses our lead time is about one week if delivered in 25 KG fiber drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:2033-24-1 EC number:217-992-8 HS code:2932 20 90 Appearance:Almost white crystalline powder Assay:≥ 98.00 % Boiling point:304 °C @ 101 325 Pa Flash point:134 °C @ 101 325 Pa Partition coefficient (log Pow):4.786 @ 25 °C

Rostabil DPDP (Isodecyl diphenyl phosphite) is a clear liquid which has C22H31O3P as chemical formula. It it used as a color and processing stabilizer in polycarbonate, polyurethanes, ABS polymers, coatings and it is also used as a secondary stabilizer in PVC. Isodecyl diphenyl phosphite is also known as Diphenyl isodecyl phosphite and phosphorous acid, 8methylnonyl diphenyl ester. Shipment Info Europe Provided Rostabil DPDP is on stock in our local warehouses our lead time is about one week if delivered in 200 KG steel drums. United States, Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:26544-23-0 EC number:247-777-4 HS code:2920 90 85 Acid Value:≤0.1 (mg KOH/g) Colour:≤100 Hazen Boiling point:435.74 °C Flash point:130.0 ºC Melting point:154.75 °C Partition coefficient (log Pow):8.52 Refractive index:1.521 – 1.527 @ 20°C Solubility in water:Insoluble (< 0.1 mg/l) Specific gravity:1.020 – 1.036 g/m3 (25 °C/15 °C) Vapour pressure:2.07E-09 Pa @ 25°C

Enox DTBP (Ditertbutyl peroxide) is a transparant liquid which has C8H18O2 as chemical formula. This dialkyl peroxide is used as initiator for the production of Low Density Polyethylene (LDPE). Further it finds its application in the polymerization and copolymerization of styrene, olefins and acrylic resins and as modification agent of polypropylene degradation. Ditertbutyl peroxide is also known as DTBP, peroxide bis(1,1dimethylethyl) and tertButyl peroxide. Availability Europe Enox DTBP is on stock in our local warehouses. Our lead time is about one week if delivered in 20 KG PE drums. South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:110-05-4 EC number:203-733-6 HS code:2909 60 00 Appearance:light yellow transparent liquid Assay:≥98.00 % Colour:≤60 Fe:≤2 mg/kg TBHP:≤0.60 % Active oxygen content:≥10.72 % Conductivity:≥1000 pS/m Density:0.793-0.803 (d20/4) Flash point:6 °C @ 113 mBar Melting point:-18 °C Partition coefficient (log Pow):1.51 Refractivity:1.385 – 1.392 (n20/D) SADT:80 °C Vapour pressure:29 mBar @ 25 °C

Rostabil TPP (Triphenyl phosphite) is a clear liquid with has C18H15O3 as chemical formula. It is an organophosphite which provides excellent colour improvement and heat stability. It is used in ABS, polyethylene, polypropylene, polystyrene, polyester resins, epoxy resins and synthetic rubber. TPP is also known as Triphenyl phosphoric acid ester and Triphenoxyphosphine oxide. Availability Europe Rostabil TPP ( Trisnonylphenol phosphite) is on stock in our local warehouses our lead time is about one week if delivered in 225 KG drums. United States, Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:101-02-0 EC number:202-908-4 HS code:2920 29 00 Acid Value:≤0.50 (mg KOH/g) Colour:≤50 Hazen Phenol:≤1.00 % Phosphorus:9.80 – 10.00 % Boiling point:386 °C @ 101.63 kPa Flash point:218.30 ºC Melting point:144 ºC Partition coefficient (log Pow):6.62 @ 25 ºC Refractive index:1.18 – 1,186 g/l @ 25 ºC Solubility in water:Insoluble (< 0.1 mg/l) Specific gravity:1.170 – 1.195 g/m3 (25 ºC / 15 ºC) Vapour pressure:0.0000763 mm Hg @ 25 ºC

Rostabil TDP (Triisodecyl phosphite) is a clear liquid which has C30H63O3P as chemical formula. It is a trialkyl phosphite which is useful as a secondary stabilizer in ABS, PET (polyethylene terephthalate), PET fibers, coatings, lubricants, PVC, polycarbonate and polyurethanes. This material is also known as Phosphorus acid triisodecyl ester and isodecylphosphite. Availibility Europe and United States Provided Rostabil TDP is on stock in our local warehouses our lead time is about one week if delivered in 180 KG steel drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:25448-25-3 EC number:246-998-3 HS code:2920 90 85 Acid Value:≤0.10 (mg KOH/g) Colour:≤50 Hazen Boiling point:485.52 °C Flash point:150 °C @ 1 atm Melting point:< -20 °C @ 1 atm Partition coefficient (log Pow):12.31 @ 25 °C Refractive index:1.4500 – 1.4610 Solubility in water:Insoluble (< 0.1 mg/l) Specific gravity:0.874 – 0.914 g/m3 (25 ºC/15 ºC) Vapour pressure:1E-09 to 5E-07 Pa

Boric acid, more specifically orthoboric acid, is a compound of boron, oxygen, and hydrogen with formula BO₃H₃ or B(OH)₃. It may also be called hydrogen borate or boracic acid. It is usually encountered as colorless crystals or a white powder, that dissolves in water, and occurs in nature as the mineral sassolite.

Rostabil DDPP (Diisodecyl phenyl phosphite) is a clear liquid which has C26H47O3P as chemical formula. It is an alkylaryl phosphite which finds its application as a color and processing stabilizer in ABS, polycarbonate, polyurethane, coatings and PET fiber where regulatory approval for food contact is not required. It can be used as a secondary stabilizer to improve color and heat stability in PVC. Diisodecyl phenyl phosphite is also known as phosphorous acid diisodecyl phenyl ester and Phenyl diisodecyl phosphite. Availability Europe Provided Rostabil DDPP is on stock in our local warehouses our lead time is about one week if delivered in 200 KG drums. United States, Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:25550-98-5 EC number:247-098-3 HS code:2920 90 85 Acid Value:≤0.1 (mg KOH/g) Colour:≤100 Free phenol:≤1.0 % Boiling point:478.99 °C Flash point:296.30 °C Melting point:90.17 °C Partition coefficient (log Pow):9.32 @ 25 °C Relative density:0.94 – 0.96 @ 20 g/ml Refractive index:1.4800 – 1.4860 @ 20 ºC Solubility in water:0.182 mg/l Specific gravity:0.930 – 0.950g/m3 (25 ºC/15 ºC) Vapour pressure:0.0076 Pa @ 25 °C

Andere namen: Zirkoniumsilicaat, Zirkoonzand, Zirkoon. CAS-nummer: 14940-68-2. Formule: Zr [SiO4]. Technische staat van Oekraïne: 14-10-015-98. Harmoniseren Goederencode: 2615100000. Uiterlijk: Lichtroze loslopend zand. Korrelvorm: gerold, langwerpig. Korrelkleur: roze, paars, roodbruin. Eindgebruik: Basismateriaal voor staalproductie, vuurvaste materialen, glasproductie, traditionele keramiek, zirkoniumproductie, glasadditieven en gieterijen. ZrO2+HfO2 min:65 ТiO2 max:0,4 Al2O3 max:2 P2O5 max:0,12 SiO2 max:32 Th+U max:320 ppm Aef, kBq/kg, max:4,0 Residue on sieve №0315:kein

Enox 101 (25Dimethyl25ditertbutylperoxyhexane) is a yellowish liquid which has C16H34O4 as chemical formula. It is used to cure polymers and elastomers, mainly polyethylene ( LDPE, HDPE), ethylene propylene diene monomer (EPDM), sillicone rubber and fluoroelastomers. Further it acts as initiator for the production of controlled rheology polypropylene (CRPP). 2,5Dimethyl2,5di(tertbutylperoxy)hexane is also known as ditertbutyl 1,1,4,4tetramethyltetramethylene diperoxide, 2,5Dimethyl2,5bis(tertbutylhydroperoxy)hexane and Ditertbutyl 1,1,4,4tetramethyltetramethylene diperoxide. Availability Europe Enox 101 (DHBP) on stock in our local warehouses our lead time is about one week if delivered in 25 KG PE drums. South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:78-63-7 EC number:201-128-1 HS code:2909 60 00 Appearance:yellowish transparent liquid Assay:≥94 00 % Color:≤60 TBA:≤0.50 % DTBP:≤0.50 % Cyclig (TMDOCH):≤5.00 % DHBBP/mono:≤1.00 % Fe mg/kg:≤1 Boiling point:306.50 °C ± 25 °C @ 760Torr Density:0.872 g/cm3 @ 20 °C Flash point:68 ºC Partition coefficient (log Pow):7.34 Melting point:8 °C @ 1 atm Refractivity:1.420 – 1.425 Solubility in water:1.420 – 1.425 Solubility in water:Insoluble (< 0.1 mg/l) SADT:80 °C Vapour pressure:0.185 Pa @ 25°C Viscosity:7.35 mPa.s @ 12 rpm (20°C)

Enox BPO50FM (Dibenzoyl Peroxide DCHP) is a white fine granular powder in 50% diclycohexyl phthalate. This diacyl peroxide has C14H10O4 as chemical formula and it is used to cure unsaturated polyester resins and acrylic resins at both ambient and elevated temperature. Dibenzoyl peroxide also so known as benzoyl peroxide, BPO and benzoperoxide. Availability Europe Provided Enox BPO50FM is on stock in our local warehouses our lead time is about one week if delivered in 25 KG PE drums. South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:94-36-0 EC number:202-327-6 HS code:2916 32 00 Appearance:White granular powder Assay:48.0 – 51.0 % Active oxygen:≤0.50 % Cl:≤0.40 % (In)organic hydrolysable Cl:≤0.50 % Water:≤1.00 % Melting point:103 – 105 20 °C @ 1.013 hPa Partition coefficient (log Pow):3.43 @ 20 °C Relative density:1.33 @ 25 °C Solubility in water:Slightly soluble (9 .1 mg/l) @ 25 °C Vapour pressure:< 1mm Hg @ 20 °C

Disodium44bis2sulfostyrylbiphenyl (Viobrite CBS) is a yellow free flowing fine granule which has the chemical formula C28H20O6S6Na2. Viobrite CBS has a higher yield of whiteness than the classical stilbene type brighteners. It finds its application in houselhold detergents. Besides it is being used in coatings and textiles. This substance is also known as Fluorescent Brightener FWA5, Distyrylbiphenylsulfonate, Fluorescent Whitener CBS and FBA 351. Availability Europe and United States Provided Viobrite CBS is on stock in our local warehouses our lead time is about one week if delivered in 25 KG cartons. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:27344-41-8 EC number:248-421-0 HS code:3204 20 00 Appearance:Yellowish free flowing fine granule Active content:≥95 % 1% E-value:1105 ~ 1181 Extinction value:0.829 – 0.885 Maxim absorption wave length:348 ± nm Moisture:≤ 5.00 % Autoignition:580 ºC Bulk density:550 – 670 g/l Density:1.49 g/cm3 (22 ºC) Melting point:>300 ºC Partition coefficient (log Pow):-2.32 @ 25 ºC / pH 6.8 pH value:7 – 8.5 Solubility in water:17.6 g/l @ 20 ºC / pH 6.7

Enox CH (1,1Di(tertbutylperoxy)cyclohexane in white oil) is being used in the production of (expanded) polystyrene and SMC/BMC. Also available Enox CH40MO and Enox CH50MO (40% and 50% white oil diluants) Availability Europe Enox CH80MO is on stock in our local warehouses. Our lead time is about one week if delivered in 20 KG PE drums. United States, Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:3006-86-8 EC number:221-111-2 HS code:2909 60 00 Appearance:Light yellow transparent liquid Assay:78 – 80.0 % Active oxygen:9.58 – 9.84 % Color:≤60 Hazen Hydroperoxide as TBHP:≥ 0.5 % Relative density:0.884 @ 20 °C Melting point:-25° Partition coefficient (log Pow):7.2 @ 25 °C SADT:60 °C Solubility in water:1.07 mg/L @ 25 °C Vapor pressure:12.3 Pa @ 25 °C

Enox PMBP, di4methylbenzoylperoxide is a white paste in silicon oil which has C16H14O4 as chemical formula. This diacyl peroxide is mainly used for the crosslinking of silicone rubbers. Di(4methylbenzoyl)peroxide is also known as pToluoyl peroxide and 4methylbenzoyl peroxide Availability Europe Enox PMBP is on stock in our local warehouses. Our lead time is about one week if delivered in 20 KG PE drums. South America, South Africa and other markets can also be served, please contact our sales department for more details CAS number:895-85-2 EC number:407-950-9 HS code:2916 39 00 Appearance:White paste Assay:49.00 – 52.00 % Active oxygen content:2.90 – 3.08 % Free chlorine:≤0..05 % Acidity as 4-methylbenzoic acid:≤0.50 % Volatile matter:≤1.50 % Bulk density:1.22 kg/m3 @ 20 ºC Melting point:101 325 Pa @ 134 ºC Partition coefficient (log Pow):4.70 @ 20 ºC SADT:80 ºC Solubility in water:0.043 mg/l (20 ºC) Vapor pressure:0.01 Pa @ 25 ºC

Andere namen: rutielzand, rutiel. CAS-nummer: 1317-80-2. Formule: TiO2. Specificaties: TU-U 14-1O-016-98. Geharmoniseerde goederencode: 2614OO9OOO. Uiterlijk: donkerbruin tot zwart droog los zand. Korrelvorm: langwerpig, gerold. Korrelkleur: rood (verschillende tinten), bruin, zwart. Opslag: In gesloten containers of zakken beschermen tegen fysieke schade. Opslagvoorwaarden onbeperkt. Eindgebruik: Rutielconcentraat wordt gebruikt bij de productie van laselektroden, pigmenttitaandioxide, titaniumspons en metaaltitanium. TiO2 min:94 AI2O3 max:0,6 Fe2O3 max:2,8 SiO2 max:1,5 ZrO2 max:1,0 P2O5 max:0,07 SO3 max:0,05 U+Th max:70 ppm Vocht max:0,5

Enox TBPB (tertButyl Peroxybenzoate) is yellowish liquid which has C11H14O3 as chemical formula. It is a low volatility, high purity, aromatic peroxyester. which is effective as medium temperature initiator for polymerization of a broad spectrum of monomers, per example acrylics, ethylene and styrene. It is also used to cure (copolymerization) unsaturated polyester resins at elevated temperatures. Further it is used as catalyst for crosslinking synthetic rubbers like EPR, EPDM and NBR. re. Availability Europe Enox TBPB is on stock in our local warehouses. Our lead time is about one week if delivered in 25 KG PE drums. South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:614-45-9 EC number:210-382-2 HS code:2916 39 90 Appearance:Light yellow transparent liquid Assay:≥98.50 % Active oxygen:≧ 8.12% Color:≤ 50 Hazen Water content:≤ 2.0 % Tert-butyl hydroperoxide:≤ 0.005% (In)organic hydrolysable Cl:≤ 0.005% Boiling point:282.40 °C ± 9.00 °C Density:± 1.059 g/cm3 @ 20 °C Flash point:109.70 °C ± 12.80 °C Melting point:9 °C – 11 °C Partition coefficient (log Pow):3.00 @ 25 °C SADT:60 °C Vapour pressure:0.00337 Torr = 0.45 Pa @ 25 °C

Enox TMCH90MO (1,1Di(tertbutylperoxy)3,3,5trimethylcyclohexane) is liquid substance which has C17H34O4 as chemical formula. It it used used for the (co)polymerization of styrene, acrylonitrile, acrylates and methacrylates in the temperature range between 90°C to 120 °C and for the polymerization of diethylene glycoldi(allycarbonate) based optical monomers. The use level of Enox TMCH90MO will depend on the particular cure parameters being used. 1,1Di(tertbutylperoxy)3,3,5trimethylcyclohexane is also known as TMCH and 1,1Bis(tertbutylperoxy)3,3,5trimethylcyclohexane. Availability Europe Provided Enox TMCH90MO is on stock in our local warehouses our lead time is about one week if delivered in 20 KG PE drums. South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:6731-36-8 EC number:229-782-3 HS code:2909 60 00 Appearance:Colorless to light yellowish liquid Assay:89 -91 % Active oxygen:9.31 – 9.52 % Color:≤ 60 Hazen TBHP:≤0.10 % Density:0.910 g/cm3 @ 20 °C Viscosity:35.5 mPa.s @ 20 °C Melting point:-29 °C Partition coefficient (log Pow):6.92 @ 20 °C SADT:60 °C Vapour pressure:2 Pa @ 20 °C

Enox YNE85MO, 2,5Dimethyl2,5di(tertbutylperoxy)hexyne3, is a yellow oily liquid which has C16H30O4 as chemical formula. This dialkyl peroxide is used as initiator for the (co)polymerization of styrene, besides it is used to crosslink polyethylene, natural rubbers and synthetic rubbers. 2,5Dimethyl2,5di(tertbutylperoxy)hexyne3 is also known as 2,5bis(tertbutylperoxy)2,5dimethylhex3yne and 2,5Di(tertbutylperoxy)2,5dimethyl3hexyne. Availability Europe Enox YNE85MO on stock in our local warehouses. Our lead time is about one week if delivered in 25 KG PE drums. South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:1068-27-5 EC number:213-944-5 HS code:2909 60 00 Appearance:Light yellow transparent liquid Assay:84.0 – 86.0 % Active oxygen:9.38 – 9.61 % Color:≤ 100 Hazen Hydroperoxide as C16H30O4:≤2.0 % Bulk density:0.883 g/cm3 @ 20 ºC Flash point:69 ºC @ 1013 mBar Vapor pressure:0.014 Pa @ 20 ºC Partition coefficient (log Pow):6.71 @ 25 ºC

Rostabil TTDP (Tri iso tridecyl phosphite) is a clear liquid with has C39H81O3P as chemical formula. It is a trialkyl phosphite which is applied as secondary stabilizer in ABS, PET, PET fibers, lubricants, PVC, polycarbonate and polyurethanes. Tri iso tridecyl phosphite is also known as tris(11methyldodecyl) phosphite. Availability Europe Provided Rostabil TTDP is on stock in our local warehouses our lead time is about one week if delivered in 200 KG steel drums. United States, Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:77745-66-5 EC number:278-758-9 HS code:2920 90 85 Acid Value:≤0.20 (mg KOH/g) Colour:≤100 Hazen Boiling point:520.01 °C Density:0.87 – 0,91 g/cm3 @ 20 ºC Flash point:154 ºC Melting point:<-20 ºC Partition coefficient (log Kow):16.73 @ 25 ºC Refractive index:1.459 – 1.465 Specific gravity:0.880 – 0900 g/m3 (25 ºC / 15 ºC) Solubility in water:Insoluble (< 0.1 mg/l) Vapour pressure:< 0.00000114 Pa @ 25 ºC

Autres noms : Silicate de zirconium, Sable de zircon, Zircon. Numéro CAS : 14940-68-2. Formule : Zr [SiO4]. État technique de l'Ukraine : 14-10-015-98. Harmoniser le code marchandise : 2615100000. Aspect : Sable rose pâle coulant librement. Forme du grain : roulé, allongé. Couleur du grain : rose, violet, rouge brunâtre. Utilisation finale : matière première pour la sidérurgie, les réfractaires, la verrerie, la céramique traditionnelle, la fabrication de zircone, la fabrication de zirconium, les additifs pour le verre et les utilisations en fonderie. ZrO2+HfO2 min:65 ТiO2 max:0,4 Al2O3 max:2 P2O5 max:0,12 SiO2 max:32 Th+U max:320 ppm Aef, kBq/kg, max:4,0 Residue on sieve №0315:aucun

Andere Namen: Zirkoniumsilikat, Zirkonsand, Zirkon. CAS-Nummer: 14940-68-2. Formel: Zr [SiO4]. Technischer Zustand der Ukraine: 14-10-015-98. Harmonisierter Warencode: 2615100000. Aussehen: Hellrosa frei fließender Sand. Kornform: gerollt, länglich. Kornfarbe: rosa, lila, rotbraun. Verwendungszweck: Rohstoff ist benutzt für die Stahlerzeugung, feuerfeste Materialien, Glasherstellung, traditionelle Keramik, Herstellung von Zirkonium, Zusatzstoff in der Glas- und Gießereiindustrie. ZrO2+HfO2 min:65 ТiO2 max:0,4 Al2O3 max:2 P2O5 max:0,12 SiO2 max:32 Th+U max:320 ppm Aef, kBq/kg, max:4,0 ТiO2 max:kein

Vicura MC55 (Pyrromelletic Acid Diphenyl Imidazoline Salt 12) is an offwhite powder with the following chemical formula C10H6O8.2C9H10N2 The curing mechanism between Vicura MC55 (Pyrromelletic Acid Diphenyl Imidazoline Salt 12) and the epoxy resin is complex. Two parallel processes are taking place; direct reaction between the imidazoline and the epoxy group and homopolymerization of the epoxy resin that is catalyzed by Vicura MC 55. Compared to most of the powder coating systems where the optimal ratio between the crosslinker and the binder is close to the stoichiometric one, in the case of Vicura MC55 the optimal ratio is generally determined empirically. For epoxy resins that are typically used for powder coatings (epoxy equivalent weights between 700 – 1000) amounts of 6,0 – 9,0 % of Vicura MC31 are recommended as good starting. Benzene1,2,4,5tetracarboxylic acid, compound with 4,5dihydro2phenyl1Himidazole (12) CAS number:54553-91-2 EC number:259-226-5 HS code:2933 2990 Appearance:White or yellow fine powder Assay:≥99 % Melting point:220 – 245 ºC Buk density:1.38 g/cm3 @ 20 ºC Melting point:±240 ºC at ± 1 atm Partition coefficient (log Pow):6.45 @ 25 ºC Solubility in water:6 g/l @ 20 ºC / pH 3.8 Vapor pressure (MGM):0 Pa @ 25 ºC

SilQon TMDSO ( tetramethyldisiloxane ), is a colorless clear liquid which has C4H14OSi2 as chemical formula. It is a is a hydrogen terminated siloxane dimer which hydride groups provide a reactive site. This allows reactions with a variety of substances which contain vinyl groups or with hydroxyl functional polysiloxanes in combination with heat or metal catalysts. Tetramethyldisiloxane is also known as 1,1,3,3Tetramethyl1,3dihydrodisiloxane. Availability Europe SilQon TMDSO is on stock in our local warehouse . Our lead time is about one week if delivered in 150 Kg plastic drums. United States, Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:3277-26-7 EC number:221-906-1 HS code:2931 90 00 Assay:≥ 99.00 % Cl content:≤ 30 ppm Boiling point:70.3 ºC @ 1013 hPa Bulk density:0.87 g/cm3 @ 20 ºC Flash point:-20 ºC @ 1.013 hPa Log Pow:4.50 Solubility in water:13 mg/l @ 20 ºC Vapor pressure:15000 Pa @ 20 ºC

Iniper 42S (Tertbutyl peroxy3,5,5trimethylhexanoate) is a clear liquid which has C13H26O3 as chemical formula. It is used as initiator in the production of acrylic polymers, polyethylene and styrene. Further it is applied as curing agent in the production of unsaturated polyester resins. Tertbutyl peroxy3,5,5trimethylhexanoate is also known as TBPIN and tertbutyl 3,5,5trimethylperoxyhexanoate. Availability Europe Provided Iniper 42S (TBPIN) is on stock in our local warehouses our lead time is about one week if delivered in 25 KG PE drums. United States, Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:13122-18-4 EC number:236-050-7 HS code:2915 90 70 Appearance:Clear liquid Assay:≥97.0 % Density:0.893 @ 20 °C Hydro peroxide:≤0.10 % Water Content:≤0.025 % Density:0.890 g/cm3 @ 20 °C Flash point:94 °C @ 1013.25 hPa Melting point:-69.15 °C Partition coefficient (log Pow):4.40 @ 25 °C SADT:60 °C Vapour pressure:0.03 mBar @ 30 °C Viscosity:5.0 mPa @ 20°C

Iniper 64 (Azobisisobutyronitrile) is an white solid which has C8H12N4 as chemical formula. Iniper 64 is used as initiator predominantly for bulk, solution, suspension and emulsion polymerisation of a wide variety of monomers. Polymers produced in this way are used for different applications such as fibres, sheets, coating resins flocculants etc. The polymerisation of the monomers used is initiated by the free cyanoisopopyl radicals which are formed upon thermal decomposition of Iniper 64. It does not form oxygenated residues as it is the case with peroxides and does not cause oxidative degradation of pigmented or dyed polymer compositions such as paints, coatings, fibres and sheets. Availability Europe Iniper 64 (AIBN) is on stock in our local warehouses. Our lead time is about one week if delivered in 20 KG fiber drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:78-67-1 EC number:201-132-3 HS code:2927 00 00 Appearance:White crystal powder / granules Assay:≥99.00 % Methanol insoluble:≤0.01 % Volatile matter:≤0.10 % Water content:≤0.50 % Density:1.098 kg/m3 @ 22.60 °C SADT:64 °C Partition coefficient (log Pow):2.87 @ 20 °C Solubility in water:Insoluble (< 0.10 mg/l) Vapor pressure:0.81 Pa @ 25 °C

Iniper AIVN SG2000 (Azobismethylbutyronitrile) is an white solid which has C10H16N4 as chemical formula.It finds its application as polymerzation initiator of amongst others acrylics and styrenes. Further it is also used in the production of foams to create nitrogen bubbles. Iniper 67 is significantly more soluble in organic solvents than Iniper 64 (AIBN) . Azobismethylbutyronitrile is also known as 2,2’Azobis(2methylbutyronitrile), 2,2′(Diazene1,2diyl)bis(2methylbutanenitrile) and AMBN. Availability Europe Iniper AIVN 2000 is on stock in our local warehouses. Our lead time is about one week if delivered in 20 KG fiber drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:13472-08-7 EC number:236-740-8 HS code:2927 00 00 Appearance:White powder / granules Assay:≥98 % Insoluble in isopropanol matter:≤0.20 % Loss on drying:≤0.50 % Water content:≤0.50 % Density:1.130 kg/m3 SADT:45 °C Melting point:48 ~ 52 °C Partition coefficient (log Pow):2.07 @ 20 °C (pH ≥ 6.99 – ≤ 7.19) Solubility in water:392 ± 5 mg/L @ 20 °C Vapor pressure:0.006 Torr @ 25 °C / 0.78 Pa

SilQon OCTEO ( Octyltriethoxysilane ), is a colorless clear liquid which has C14H32O3Si as chemical formula, is used in polymer preparations, coatings, personal care and household products, tyre production and sealants. Octyltriethoxysilane is also known as octyltriethoxysilane and triethoxyoctylsilane. Availability Europe and United States Provided {{Product}} is on stock in our local warehouses our lead time is about one week if delivered in 200 KG steel drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:2943-75-1 EC number:220-941-2 HS code:2931 90 00 Assay:≥ 98.00 % Color (Pt-Co):≤ 30 Refractive index:1.4090 – 1.4190 Boiling point:259.60 ºC Bulk density:0.876 g/cm3 @ 25 ºC Flash point:45 ºC @ 1013 hPa Log Pow:5.6 @ 20 ºC Solubility in water:0.79 mg/l @ 20 ºC Vapor pressure:0.11 Pa @ 25 ºC